Ardunio karta yüklerken hata

Kodla Büyü

bundara79

Seçkin Üye
Seçkin Üye
Mesajlar
304
arkadaşlar yeni aldığım Ardunio kartıma yükleme yapamıyorum.Bilgisayar tanıttım port ayarlarını yaptım.Ancak yükleme yapamıyorum.
Ardunio kartının üzerindeki ON ve L ledleri sürekli yanıyor bu normal mi?
yükleme yaparken şu hatayı veriyor


Çalışmanız programın 2.214 bayt (6 %) saklama alanını kullandı. Maksimum 32.256 bayt.
Global değişkenler belleğin 124 byte kadarını (6%) kullanıyor. Yerel değişkenler için 1.924 byte yer kalıyor. En fazla 2.048 byte kullanılabilir.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x23
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x23
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x23
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x23
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x23
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x23
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x23
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x23
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x23
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x23
Karta yüklenirken sorun oluştu. Tavsiyeler için http://www.arduino.cc/en/Guide/Troubleshooting#upload adresine göz atabilirsiniz.


Lütfen yardım ediniz.Teşekkürler
 
Kartınız nano ise old bootloader seçeneğini seçin yoksa yüklenmez.
 
Geri
Üst